Product Name：waterjet cutting head cylinder
1. Name: waterjet cutting head cylinder
2. Size: Standard flow parts
4. Quality assurance: 1year
5. Material: stainless steel
7. Application:waterjet cutting machine
Main Export Markets:
Any third-party trademarks or images shown here are for reference purposes only. We are not authorized to sell any items bearing such trademarks.
The pneumatic actuator converts the pressure energy of the compressed gas into a pneumatic actuator of mechanical energy. There are two types of cylinders for reciprocating linear motion and reciprocating oscillation. The cylinders for reciprocating linear motion can be divided into four types: single acting, double acting, diaphragm and impact cylinder.
1. Single-acting cylinder: There is a piston rod at one end. The air supply from the side of the piston can generate air pressure. The air pressure pushes the piston to generate thrust and returns by spring or self-weight.
2. Double-acting cylinder: alternately supply air from both sides of the piston, outputting force in one or two directions.
3. Diaphragm cylinder: replace the piston with a diaphragm, output the force in only one direction, and reset with a spring. Its sealing performance is good, but the stroke is short.
4. Impact cylinder: This is a new type of component. It converts the pressure energy of the compressed gas into the kinetic energy of the piston's high-speed (10-20 m brush) motion. The impact cylinder adds a middle cover with a spout and a vent. The middle cover and the piston divide the cylinder into three chambers: a gas storage chamber, a head chamber and a tail chamber. It is widely used for various operations such as cutting, punching, crushing and forming. The cylinder that reciprocates is called the swinging cylinder, and the inner chamber is divided into two by the vane, and the two chambers are alternately supplied with air, and the output shaft is oscillated, and the swing angle is less than 280°. In addition, there are rotary cylinders, gas-liquid damping cylinders and stepping cylinders. The cylinder for the high-pressure waterjet is mounted on the cutter head of the water cutter, and the hole directly above is the pressure relief valve under the intake air.
Product source: foreign imports and domestic production, users can also map processing, or inform the waterjet cutting machine manufacturers, can be matched with resistance